Sizes

The measurements for Giovanni Raspini rings are expressed in Italian sizes and can be consulted in the table below. Each size corresponds to a specific measurement for the internal diameter of the ring and one for its internal circumference, that is, to say that of the finger on which you want to wear the ring. Both measurements are expressed in millimetres. The table also shows the measurements in European sizes, which are also commonly used. The rings in the assortment do not all have the same size range, for example, sizes 22 and up are generally used for men's products, while only smaller products use sizes smaller than 12.

If you already have a ring that fits you comfortably, you can use it to measure its internal diameter with the help of a ruler on which the millimetre marks are clearly visible (if the ring is not perfectly circular, measure the shortest distance). Otherwise, you can measure the circumference of the finger on which you want to wear the ring with the help of a string or a thin tape, marking the point where it meets around the finger with a marker and then laying it against a ruler; be careful to take the measurement at the exact height on which you will wear the ring, also making sure that the string runs smoothly along the entire length of your finger. Once you have your ring measurement, choose the corresponding size on the table.

If you are undecided between two sizes, we advise you to choose the larger one: fingers are often slightly more swollen at the end of the day than in the morning, or in particularly hot or cold periods. Also, remember that our hands are not perfectly identical and that the fingers of the hand with which we write often have a greater circumference.

Some rings of the same size may have a slightly different fit, depending on their design: large rings, which tend to wrap around the finger a lot, for example, will have a smaller fit.

Finally, we remind you that you can always rely on the free return service to return a ring if it's the wrong size and buy the right one with complete peace of mind.

Some bracelets in the assortment can be purchased by choosing between two or more sizes in relation to their length, which is expressed in centimetres. The length of the bracelet, depending on the type of product, is expressed in centimetres, or in sizes such as 'M' or 'L'; in the latter case, simply consult the Details section on the product page to find out the exact size (size M refers to lengths between 18.5 and 20.5 cm, size L to lengths between 21 and 23 cm).

With the help of a string or a thin tape, you can measure the circumference of your wrist at the point where you intend to wear the bracelet: we advise you to add a couple of centimetres to it to identify the size that guarantees you the most comfortable wear out of the options proposed. We remind you that the measure expressed refers to the length of the bracelet when extended, between the clasp and the last available link, and therefore does not include the end of the chain if it has any logoed medal and little horn.

As for bracelets and necklaces that do not have variable sizes, we invite you to consult the Details section within the product presentation page. Here, the words "Clasp with adjustment links" indicates that, although the piece of jewellery can be purchased in one size, it is still possible to adjust the size by hooking the clasp to an inner link, instead of at the end, in order to shorten it. For these items, the length expressed in the product presentation always refers to the widest possible hook and, even in this case, does not include any logoed medal and little horn.